Monroe, NC Paving Company
Driveway resurface in Monroe, NC:
This gives you a driveway that looks completely new, but at a fraction of the price, and unless there are issues with the foundation, the cracks and pits that you are covering up won’t return for many years to come.
Driveway total removal in Monroe, NC:
When a driveway is broken and cracked to the point that an resurface can’t be done then the solution is a complete driveway removal and replace. The existing asphalt/concrete driveway is removed down to stone sub base. Then replace with three compacted inches of hot mix asphalt.
So, the next question that would be asked is, how do I make that decision. One of our experienced estimators with help you with that decision based on current condition of your driveway and the budget that you’re working with. Armor Asphalt has have a solution for any driveway with any budget.
Fully Licensed & Insured –
All Work Guaranteed
Experience Is the Key to a Job Well Done
Armor Asphalt in Monroe, NC has established the unique ability to provide the finest quality for your residential asphalt paving job. Coupled with proper preparation, residential asphalt paving equipment and knowledge, our residential asphalt paving makes your driveway’s appearance and strength second to none. We are well prepared with any necessary permits or pre-paving requirements so that the residential asphalt paving work on your driveway is implemented in the proper progression.
Asphalt Maintenance
Commercial & Residential
All asphalt in Monroe, NC requires maintenance. Regular maintenance, including crack filling, sealcoating, and minor repair work, will prevent major costly repairs and premature replacement in the future.
Sealcoating
Sealcoating in Monroe, NC is an important part of the asphalt maintenance process. Over time, asphalt is susceptible to oxidation from the sun and damage from water penetrating beneath its surface. Sealcoating not only makes your pavement look new, it protects it from oxidation as well as petroleum spills.
Sealcoating extends the life of your asphalt and protects your investment. We recommend sealcoating any newly paved project within the first two years, and then every two to four years thereafter.
When sealcoating we begin by prepping the entire area by removing all dirt, debris, and vegetation. We then prime any oil spots and stains present on the driveway. A “Tarconite” Coal-Tar based sealer mixed with 5 pounds of sand per gallon for traction is then applied using a squeegee or spray method. When complete the service area is cordoned off with caution tape by Armor Asphalt.
Why Sealcoating?
Asphalt Maintenance
Why Crackfill?
When crack sealing we first clean all cracks of dirt, debris, and vegetation. Larger cracks (2″-3″) are treated as an asphalt repair and filled first with hot asphalt mix and then sealed with the hot rubber. If a project calls only for crack sealing, and the area will not be seal coated ,we apply “Black Beauty” over the filled cracks to prevent tires from sticking to the rubber.
Another important reason to maintain and repair cracks is to prevent moisture from penetrating under the asphalt surface causing damage to your driveway. spreading and doubles the life of the pavement. Pavement repair in early stages of deterioration pay big dividends later delaying costly resurfacing and Armor Asphalt in Monroe, NC can help you with this and all of your asphalt paving needs.