Indian Trail, NC

Indian Trail, NC Paving Company

Driveway resurface in Indian Trail, NC:

Before shelling out the money to a paving contractor to redo a driveway or dealing with constant patches, consider the middle ground. Armor Asphalt Indian Trail, NC paving company which can now just resurface the driveway, essentially installing a new top layer on top your old driveway covering the existing driveway. This gives you a driveway that looks completely new, but at a fraction of the price, and unless there are issues with the foundation, the cracks and pits that you are covering up won’t return for many years to come.

Driveway total removal in Indian Trail, NC:

When a driveway is broken and cracked to the point that an resurface can’t be done then the solution is a complete driveway removal and replace. The existing asphalt/concrete driveway is removed down to stone sub base. Then replace with three compacted inches of hot mix asphalt. So, the next question that would be asked is, how do I make that decision. One of our experienced estimators with help you with that decision based on current condition of your driveway and the budget that you’re working with. Armor Asphalt has have a solution for any driveway with any budget.

Fully Licensed & Insured –
All Work Guaranteed

Experience Is the Key to a Job
Well Done

Armor Asphalt in Indian Trail, NC has established the unique ability to provide the finest quality for your residential asphalt paving job. Coupled with proper preparation, residential asphalt paving equipment and knowledge, our residential asphalt paving makes your driveway’s appearance and strength second to none. We are well prepared with any necessary permits or pre-paving requirements so that the residential asphalt paving work on your driveway is implemented in the proper progression.

Asphalt Maintenance

Commercial & Residential

All asphalt in Indian Trail, NC requires maintenance. Regular maintenance, including crack filling, sealcoating, and minor repair work, will prevent major costly repairs and premature replacement in the future.

Sealcoating

Sealcoating in Indian Trail, NC is an important part of the asphalt maintenance process. Over time, asphalt is susceptible to oxidation from the sun and damage from water penetrating beneath its surface. Sealcoating not only makes your pavement look new, it protects it from oxidation as well as petroleum spills. Sealcoating extends the life of your asphalt and protects your investment. We recommend sealcoating any newly paved project within the first two years, and then every two to four years thereafter. When sealcoating we begin by prepping the entire area by removing all dirt, debris, and vegetation. We then prime any oil spots and stains present on the driveway. A “Tarconite” Coal-Tar based sealer mixed with 5 pounds of sand per gallon for traction is then applied using a squeegee or spray method. When complete the service area is cordoned off with caution tape by Armor Asphalt.

Why Sealcoating?

Sealcoating in Indian Trail, NC – as part of a comprehensive pavement maintenance program – is one of the most important elements in extending pavement life. Sealcoating protects the asphalt from water penetration, oil, salt and the sun’s ultraviolet rays and provides a longer life of the asphalt pavement.

Asphalt Maintenance

Armor Asphalt’s asphalt maintenance team in Indian Trail, NC will provide recommendations for the type of maintenance that is required when any paving is done. Sometimes the difference between a new asphalt parking lot lasting 25 years and new parking lot that lasts 10 years is protecting your investment with seal coat and crack seal, if needed.

Why Crackfill?

Crack sealing in Indian Trail, NC is also an important part of your asphalt maintenance. By sealing cracks you are preventing water from seeping into the asphalt sub-base. Any and all cracks should be sealed as soon as they are visible as water entering the sub-base can undermine the structure of the driveway. When crack sealing we first clean all cracks of dirt, debris, and vegetation. Larger cracks (2″-3″) are treated as an asphalt repair and filled first with hot asphalt mix and then sealed with the hot rubber. If a project calls only for crack sealing, and the area will not be seal coated ,we apply “Black Beauty” over the filled cracks to prevent tires from sticking to the rubber. Another important reason to maintain and repair cracks is to prevent moisture from penetrating under the asphalt surface causing damage to your driveway. spreading and doubles the life of the pavement. Pavement repair in early stages of deterioration pay big dividends later delaying costly resurfacing and Armor Asphalt in Indian Trail, NC can help you with this and all of your asphalt paving needs.

We Guarantee All Our Work

Armor Asphalt’s skillful team can handle any job involving asphalt or concrete.